Research Papers Published (National/ International Journal)
International Journals

1. Shekhar, S., Kumar, Y., Verma, M. and Ghritlahre, H.K., 2025. Comparative performance analysis of dual spiral and parallel riser tubes in solar flat plate water heater with and without reflector: an experimental study. Journal of Thermal Analysis and Calorimetry, pp.1-18. https://doi.org/10.1007/s10973-025-14081-3  Impact Factor-3.0
2. Shekhar  S, Kumar  Y, Verma M, and Ghritlahre  H.K., 2024.Investigation of a dual-spiral flat plate solar water heater under natural convection: an experimental study. International Journal of Ambient Energy, 45(1), p.2366494. 1-15  Impact Factor-3.4
3. Shekhar S., Kumar Y.,  Verma  M., Ghritlahre H.K., Kumar  S., and.,Verma, 2024. A review of performance improvements in design features of liquid flat-plate solar collector. International Journal of Green Energy, 21(5), pp.1072-1106. Impact Factor-3.4
4. Shiena Shekhar, Satish Kumar, Harish Kumar Ghritlahre & Sanjay Agrawal., 2024. “An experimental investigation of active mixed-mode solar dryer utilizing north wall reflector” Energy Sources, Part A: Recovery, Utilization, And Environmental Effects, Vol. 46, No. 1, 16813–16835 https://doi.org/10.1080/15567036.2024.2431640  Impact Factor-3.7
5. Shiena Shekhar, Saurabh Kumar Sahu,  Akhtar Khan, Dheeraj Lal Soni, Prashant Kumar Gangwar, and Manish Gupta 2024. “A hybrid approach for the machinability analysis of Incoloy 825 using the entropy-MOORA  method”, High Temperature Materials and Processes; 43: 20240058, pg-1-13 Impact Factor-1.6
6. Shiena Shekhar, Saurabh Kumar Sahu , Ramit Chugh, Devendra Sahu, Rajiv Khatri, Shubhrata Nagpal, Innovations in Functionally Graded Materials for Advanced Engineering Applications, /Journal of Propulsion Technology, ISSN: 1001-4055 Vol. 45 No. 1 (2024), pp-2763-2775.
7. Shiena Shekhar,  Satish Kumar, Neelam Dewangan, Geetanjali Verma, Harish Kumar Ghritlahre, Manoj Verma, Yogesh Kumar, Sanjay Agrawal  2023. Performance analysis of natural and forced convection mixed mode UV tent house solar dryer for potato drying. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45:4, 11482-11504, DOI: 10.1080/15567036.2023.2259839 
8. Shiena Shekhar, Jyoti Singh Parihar, Satish Kumar, Lalit Kumar, Yogesh Kumar, Harish Kumar Ghritlahre, Manoj Verma, Ajay Kumar Gupta, Sanjay Agrawal, 2022, Development of novel cabinet solar dryer using UV sheet and its performance evaluation: An experimental study. Solar Energy 239 (1–9) 
9. Shiena  Shekhar, Rajesh Kumar 2019. Establishment of Green Supply Chain Management in Steel Industries Using Interpretive Structural Modeling, Perspectives on Global Development and Technology 18: 363-374   
10. Satish Kumar Sao, Dr. Shiena Shekhar Dr. Mukesh Dubey and  Dr. Raghwendra Banchhor    (2022) "Optimization of rolling parameters for improving Quality Factor of Thermo mechanically treated bar using soft Computing Techniques" Specialusis Ugdymas 
11. Ritu Shrivastava, Dr.(Mrs) Shiena Shekhar     (2022) "Analysis of Critical Parameters and Identification of Stakeholders in Steel Manufacturing Industries: A Pilot Study"   Specialusis Ugdymas.
12. Yashwant Sahu, Dr. Shiena Shekhar (2022) "Application of Taguchi Optimization in Lathe Tool Cutting Operation using Ansys Software"   High Technology Letters.  
13. Shiena Shekhar, Yogesh Kumar, Manoj Verma, Harish Kumar Ghritlahre, Satish Kumar,Priyanka Verma (2023) "A review of performance improvements in design features of liquid flat-plate solar collector" International Journal of Green Energy.
14. Dr.(Mrs.) Shiena Shekhar, Jyoti Singh, Satish Kumar, Harish Chitrlahre (2022) "Development of novel cabinet solar dyerusing UV Sheet and it's performance evaluation- An experimental study" Solar Energy.
15. Dr.(Mrs.) Shiena Shekhar Satish Kumar, Jyoti Singh Parihar, Lalit Kumer, Harish Kumar Ghritlahre, Manoj Verma "Performance Evaluation of Cabinet Solar Dryer using Ultraviolet (UV)" Materials Today: Proceedings, (2021)
16. Dr.(Mrs.) Shiena Shekhar   Rajesh Kumar (2019)"Analysis of Transient Belt Stretch for Horizontal and Inclined Belt Conveyor System", i-managers Journal on Management.
17. Dr.(Mrs.) Shiena Shekhar   Rajesh Kumar (2019) "Performance measures for Manufacturing Industries in India A case Study Analysis", Perspectives on Global Development
    and Technology.
18. Rajesh Kumar, ShienaShekhar, “Establishment of Green Supply Chain Management in Steel Industries Using Interpretive Structural Modeling ”, Perspectives on Global Development and Technology,18 (2019), 363-374) ISSN -1569-1500  (SCOPUS Indexed).
19. Rajesh Kumar, Dr. ShienaShekhar, “ ISM – MICMAC  Analysis For The Implementation of Green Supply Chain Management ” International Journal of Research and Analytical Reviews , Vol – 6(2), May 2019,15-26,ISSN- 2349-5138 (UGC Approved).
20. Rajesh Kumar, Dr. ShienaShekhar, “ Reliability Testing of the Data Obtained from Steel Industries” International Journal of Management , Technology and Engineering, Vol – 9 (5) , May 2019,1418-1429,ISSN- 2249-7455 (UGC Approved).
21. Rajesh Kumar, ShienaShekhar, “Assessment of the Methods for the Implementation of Green Supply Chain Management in Industries”, International Journal of Advanced Scientific Research and Management ,Vol – 4(5),2019 , 67-73, ISSN -2455-6378  (UGC Approved)
22. Rajesh Kumar, Dr. ShienaShekhar, “ Improving Environment through Green Manufacturing ” International Journal of Management , Technology and Engineering, Vol – 8 (3) ,2018,1420-1423, ISSN- 2249-7455 (UGC Approved).
23. Rajesh Kumar, ShienaShekhar, “Implementation of Green Supply Chain Management in Steel Industries in Chhattisgarh ”, International Journal of Advanced Engineering Research and Studies, Vol. 4(2), 2015,259-260, E-ISSN – 2249-8974.
24. AnkurMalviya, ShienaShekhar,  “Analyzing of Acoustic Signatures of GMAW Welding Process to Monitor Weld Quality Using Python”, International Journal of Management, Technology And Engineering, ISSN NO : 2249-7455, Volume IX, Issue III, MARCH/2019, 1-5.
25.  AnkurMalviya, ShienaShekhar,  “Optimization of MIG Welding Parameters to Control Quality of Welding”, IJSRD - International Journal for Scientific Research & Development  Vol. 7, Issue 01, 2019 | ISSN (online): 2321-0613, 1499-1502.
26. Shiena Shekhar, Ritu Shrivasatava, “ Role of Supply Chain Inventory System”, International Journal of Engineering Sciences & Management, 7(1), Jan-March 2017.
27.  AnkurMalviya, ShienaShekhar,  “A Review Paper on Shape Memory Alloy’s Applications and Its opportunities in Heat Recovery Systems”, IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 11, 2018 | ISSN (online): 2321-0613, 140-143.
28. Shiena Shekhar, Ankur Malviya, “Requirements of Sustainable Manufacturing in Industrial Review”, Research Journal of Engineering Sciences, 6(2),1-4, February 2017.
29. Shiena Shekhar, Vibhashree C, “Application of TQFD – A Case study for Performance & Quality Improvement in Engineering Institutions in Chhattisgarh” International Journal of Scientific & Engineering Research, 7 (12), December-2016.
30. Shiena Shekhar, Ankur Malviya, “Need of Sustainable Energy and Its Dimensions: A Review” International Journal for Scientific Research & Development, 4 (10), December 2016.
31. Shiena Shekhar, Ankur Malviya, “Applications of RSCM- A Review”, International Journal for Scientific Research & Development, 4 (2), April 2016.
32. Shiena Shekhar, Manish Sinha, “Determination & Comparison of Linear Motion in Shaper Machine Tool using Ansys & Mathematical VonmisesStree Analysis”, International Journal of Engineering & Management Research, 5(4),August 2015.
33. Shiena Shekhar, Manish Sinha, “Literature Review of Single Point Cutting Tool on Finite Element Analysis”, International Journal of Engineering & Research Technology, May 2015.
34. Shiena Shekhar, Rajesh Kumar, “Green Supply Chain Management – A Review” International Journal of Research in Aeronautical & Mechanical Engg.,(IJRAME), 1(7), 245-255, November 2013.
    Shiena C Shekhar, Arun Arora, “Customer View Analysis of Organization and Governance in Indian
35. Shiena Shekhar, “Development Trends in Additive Manufacturing and 3D Printing”, Journal of Engineering 2015, 1(1): 85–89 DOI 10.15302/J-ENG-20150126
36. Engineering Education–A QFD Approach” International Journal of Engineering and Innovative Technology (IJEIT) 2(5), 141-150, November 2012
37. Shiena C Shekhar, Arun Arora, “Translating Customers’ Voice to Operational Characteristics of Physical Resources (Central Facilities) in Indian Engineering Education- A QFD Approach”, Journal of Pacific Management Review (JPMR), University of California, USA, 2009.
38. Shiena C Shekhar, Arun Arora, “Customer View Analysis of Human Resources- Students in Indian Engineering Education– A QFD Approach”, International Journal of Engineering Research and Industrial Applications (IJERIA), Ascent Publications, 2(6), 339-354, Oct 2009.
39. Shiena Shekhar, Rajesh Kumar, “Analysis and Development of Supply Chain Mnagement in Retail Sector in Chhattisgarh” International Journal on Mechanical & Automobile Engineering”, (IJMAE), 3(4), 111-114, March – May 2009.
40. Shiena C Shekhar, Arun Arora, “Performance Evaluation of Technical       Education in Chhattisgarh”, International Journal of Mathematical Science and Engineering Applications (IJMSEA), Ascent Publications, 2(3), 153-161, Sept.2008.

National Journals

1. Shiena C Shekhar, Arun Arora, “Customer View Analysis of the Financial Resources in Indian Engineering Education– A QFD Approach”, Indian Journal of Technical Education(IJTE), New Delhi, India, Vol- 33, No. 2 April - June 2010.
2. Shiena C Shekhar, Arun Arora, “Customer View Analysis of the Research & Development & Interaction Effort in Indian Engineering Education– A QFD Approach”, Journal of Technology, PSG College of Technology, Coimbatore, March-2010.
3. Shiena C Shekhar, Arun Arora, “Customer View Analysis of Supplementary Processes in Indian Engineering Education– A QFD Approach”, Indian Journal of Engineering, Science & Technology (IJEST), Bannari Amman Institute of Technology, Sathyamangalam, Erode District, Tamil Nadu, April2009.

Full length paper in proc. of International / National Conferences
International Conferences/Symposium/Seminars

1. Shiena Shekhar, Iron & Steel Technology: Recent Advancements, Innovations &Future Propectus” Department of Metaullargical Engineering, O P Jindal University, International Conference. 4-8 March 2024
2. Ritu Shrivastava, Shiena Shekhar, and R. B Chadge., Application of supply chain management in iron and steel industries, RAMMML-22 International Conference, YCCE/proceedings, Yeshwantrao Chavan College of Engineering, Nagpur, 909-915, 2022
3. Shiena C Shekhar , Khoman Kumar , Sakshi, “Prediction of Fatigue Limit in Brass Materials using Monte Carlo Simulation”, 2nd Indo-Brazil International Conference on Advanced Materials & Processing, (Sponsered by DST, IIndia & CNPq Brazil Sponsored), 27-28 March 2017.
4. Shiena C Shekhar, Ankur Malviya, “A Facility Location Model for Reverse Supply Chain Management in Manufacturing Industries”, International Seminar on Non-Conventional Energy Sources for Sustainable Development of Rural Areas, Parthvi College of Engineering management, 24 – 25 March 2017.
5. Shiena Shekhar, Meenu Sahu, “Modification of sealing valve in Belless Top charging System Blast Furnance- A case study in Vizag Steel Plant ”, International Conference on Advances in Mechanical, Material, Manufacturing, Automobile, Aeronautical Engineering & Applies Physics, Krishi Jawaharlal Nehru University, New Delhi, 7-8 June, 2014.
6. Shiena C Shekhar, Arun Arora, “Engineering Education Paradigm in India – A need for Continuous Quality Improvement to meet Global Challenges”, International Seminar on Quality of Professional Education in the Present Era, IE(I) & Indian Association of Teachers Educators (IATE), Dehradun, 25-26 July 2009.
7. Shiena C Shekhar, Arun Arora, “Sustainable Development: A necessity for inclusion in Technical Education”, International Conference, Wessex Institute of Technology, UK, April 2007.
8. Shiena C Shekhar, Arun Arora, “Quality system Excellence in Engineering Education”, International Conference on Engineering Education(ICEE), Coimbra, Portugal, Sept.2007.
9. Shiena C Shekhar, Arun Arora, “Customer View Analysis of the Human Resources (Faculty & Staff) in Indian Engineering Education– A QFD Approach”, 21st Symposium (in Savannah, Georgia USA), QFD Institute, New York, USA, December 5, 2009.

National Conferences/Symposium/Seminars

1. Shiena Shekhar,,Manish Kumar, “Comparison of Optimization of Cutting Process Parameter in Turning using Taguchi Method”, National Conference on Research Challenges in Mechanical Engineering for National Development, 28th March 2017.
2. Shiena Shekhar , Khoman Kumar, ” Analysis of Behavioral Pattern of Hob in Milling Operation”, National Conference on Research Challenges in Mechanical Engineering for National Development, 28th March 2017.24.
3. Shiena Shekhar, Morrish Kumar, “ Vibration Analysis of Railway Concrete Sleeper for Different Contact Condition using MATLAB”, National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, Bhilai Institute of Technology, Durg, 29-30 Jan 2016.
4. Shiena Shekhar, Ankur Malviya, “An Exploratory Analysis of Reverse Logistics in Manufacturing Industries”, National Conference on Research Challenges in Mechanical Engineering for National Development, 28th March 2017.
5. Shiena Shekhar, Rajesh Kumar, “Performance Measurement of Supply Chain Using Balance Score Card Method”, National Conference on Research Challenges in Mechanical Engineering for National Development, 28th March 2017.
6. Shiena Shekhar, Ankur Malviya, “ Mathematical Modelling for Reverse Supply Chain in Manufacturing System”, National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, Bhilai Institute of Technology, Durg, 29-30 Jan 2016.
7. Shiena Shekhar, Rajesh Kumar, “ Establishment of Green Supply Chain Management”, National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, Bhilai Institute of Technology, Durg, 29-30 Jan 2016.
8. Shiena Shekhar, Abhishek Gadre, “ Application of Response Surface Methodology for Experimental Investigation of Parameters Influencing Surface Roughness in Turning Process”, National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, Bhilai Institute of Technology, Durg, 29-30 Jan 2016.
9. Shiena Shekhar, Manish Sinha, “Literature Review of Single Point Cutting Tool on Finite Element Aanalysis”, National Conference on Advances in Manufacturing Technologies, RSR-Rungta College of Engineering & Technology, April 10th – 11th, 2015.
10. Shiena Shekhar, Vibhashree C, “A Model Development of CRM & QFD in the Banking Industry through Customer Participation in Service Delivery”, National Conference on Clean, Efficient and Affordable Future through Sustainable Energy, Department of Mechanical Engineering, VEC Lakhanpur, Sarguja & CG Cost Raipur, Chhatisgarh, March 30-31,2015.
11. Shiena Shekhar, Rajesh Kumar, “Implementation of Green Supply Chain Management in Steel Industries in Chhattisgarh”, National Conference on Innovations in Mechanical Engineering for Sustainable Development, Bhilai Institute of Technology, Durg, 20-21 Feb 2015.
12. Shiena Shekhar, Manish Sinha, “Literature Review of Single Point Cutting Tool on Finite Element Aanalysis”, National Conference on Innovations in Mechanical Engineering for Sustainable Development, Bhilai Institute of Technology, Durg, 20-21 Feb 2015.
13. Shiena Shekhar, Chandra H, Aakansha Suryawanshi, “Optimization to Improve the Quality of Centrifugal Casting by Grey Fuzzy Method”, National Conference on Innovations in Mechanical Engineering for Sustainable Development, Bhilai Institute of Technology, Durg, 20-21 Feb 2015.
14. Shiena C Shekhar, Arun Arora, Mal M.C.“Technical Education in Chhattisgarh - A TQM Application”, Higher Education: New Challenges and Emerging Roles”, East Zone Vice Chancellor’s Conference, Varanasi, July 23 – 24, 2010.
15. Shiena C Shekhar, Arun Arora, “Improvement of Student Visualization Skills through Rapid Prototyping Technology”, BITCON 2008, National conference, Bhilai Institute of Technology, 7-8th November 2008.
16. Shiena C Shekhar, Arun Arora, “Intricated Castings using Reverse Engineering, Laser Scanning and Rapid Prototyping Technology”, BITCON 2008, National conference, Bhilai Institute of Technology, 7-8th November 2008.
17. Shiena C Shekhar, Rajesh Kumar, “Analysis of Status and Development of Supply Chain Management in Retail Sector”, BITCON 2008, National conference, Bhilai Institute of Technology, 7-8th November 2008.
18. Shiena C Shekhar, Rajesh Kumar, “Cost Reduction Through Optimization of Supply Chain planning with Variable Demand”, Cost Reduction Strategies in Manufacturing, 23rd National Convention of Production Engineers, The Institution of Engineers (India), Karnataka State Center, Banglore, June 13-14 th, 2008.
19. Shiena C Shekhar, Arun Arora, “A Framework for Analyzing Total Quality in Technical Education Institution: An Approach using Eduqual and Quality Function Deployment Methodology“, Quality Edge-2008, All India Seminar on Organizational Excellence for Global Competitiveness, Yashwant Chavan College of Engineering, Nagpur, Maharashtra, 19-20 Jan 2008.
20. Shiena C Shekhar, Arun Arora, “Translating Customers’ Voices into Operations Requirements- A QFD application in Technical Education System”, National Conference, Institute of Engineers (India), Jabalpur, Chhattisgarh, 6-June 2007.
21. Shiena C Shekhar, Arun Arora, “Redesign of Engineering Education system: An appraisal of the factors which influence customers’ satisfaction”, National Conference, Technologia-07, Madhya Pradesh Christian College of Engineering & Technology, Bhilai, Chhattisgarh, March 2007.
22. Shiena C Shekhar, Arun Arora, “Sustainable Development: A necessity in Technical Education”, National Conference, Institute of Technology, Guru Ghasidas University, March 2007.
23. Shiena C Shekhar, Shabana Naz, “ Critical Analysis of Quality Circles and Implementation of Production Work Teams”, National Conference – BITCON 2007, Mechanical Engineering Department, Bhilai Institute of Technology, 16-17 March 2007.
24. Shiena C Shekhar, Pallab Roy, “ Analysis of Implementation of Total Productive Maintainence”, National Conference – BITCON 2007, Mechanical Engineering Department, Bhilai Institute of Technology, 16-17 March 2007.
25. Shiena C Shekhar, Arun Arora, “Initiatives of service Quality Applied in Engineering System – A Review of Literature”, National Conference – BITCON 2007, Mechanical Engineering Department, Bhilai Institute of Technology, 16-17 March 2007
26. Shiena C Shekhar, Arun Arora, Gupta M.K., Kowar M.K., “Opportunities of Broad Band Technology in Enhancing Quality of Education”, All India Seminar, Institution of Engineers (India), Bhilai Local Centre, 6-7 Jan 2007
27. Shiena C Shekhar, Arun Arora, “Sustainable Development: A necessity in Technical Education”, National Conference, Institute of Technology, Guru Ghasidas University, Chhattisgarh, 6-7 Jan 2007.
28. Shiena C Shekhar, Arun Arora, “Quality Improvement in Technical Education Institutes for the Development of Chhattisgarh”, National Seminar, Institution of Engineers (India), Chhattisgarh state centre, 15 Sept-2006.

Book / Book Chapters Published: