SCI/SCIE Journal Publications:

[1] Mishra, S. K., Mishra, A., Singh, P. & Dubey, M. (2024).Heat Transfer and Entropy Generation in Vibrational Flow: Newtonian vs. Inelastic non-Newtonian Fluid. Journal of Applied Fluid Mechanics, 17(11), pp. 2349-2360. https://doi.org/10.47176/jafm.17.11.2699

[2] Mishra, S. K., Mishra, A. & Singh, P. (2024).Entropy Generation in Newtonian Vs Non-Newtonian Nanofluid Flow under Vibration. PhysicaScripta, 99(9), pp. 5016

https://doi.org/10.1088/1402-4896/ad6d11

[3] Mishra, S. K.,Shende, A., Mishra, A., & Singh, P. (2024). Exploring Heat Transfer augmentation and Entropy Generation in Nanofluid Flow Induced by Vibration: Influence of Velocity and Rheological Properties. Numerical Heat Transfer, Part A: Applications pp. 1–18. https://doi.org/10.1080/10407782.2024.2381619

[4] Mishra, S. K.,Tripure, A., Mishra, A., & Singh, P. (2024). Effects of vibrational flow on nanofluid flow behavior under different temperature boundary conditions. Numerical Heat Transfer, Part A: Applications, pp. 1–17.https://doi.org/10.1080/10407782.2024.2340071

[5] Mishra, A., Bhusnur, S., Mishra, S. K.& Singh, P (2024). Advancing ECG Signal Modeling through a Hybrid Parametric Spline Approach. Circuits, Systems, and Signal Processing. https://doi.org/10.1007/s00034-024-02797-w

[6] Mishra, A., Bhusnur, S., Mishra, S. K.& Singh, P (2024). Comparative Analysis of Parametric B-Spline and Hermite Cubic Spline Based Methods for Accurate ECG Signal Modeling.Journal of Electrocardiology, 86(5) :153783

https://doi.org/10.1016/j.jelectrocard.2024.153783

[7] Mishra, A., Bhusnur, S., Mishra, S. K.& Singh, P (2024). Exploring a New Frontier in Cardiac Diagnosis: ECG Analysis Enhanced by Machine Learning and Parametric Quartic Spline Modeling.Journal of Electrocardiology, 85, pp. 19-24.

https://doi.org/10.1016/j.jelectrocard.2024.05.086

[8] Mishra, A., Bhusnur, S. &Mishra, S. K. (2023). A Neoteric Parametric Representation and Classification of ECG Signal. Circuits, Systems, and Signal Processing 42 (9), pp. 5725-5738. https://doi.org/10.1007/s00034-023-02359-6

[9] Biswas, P., Mishra, S. K., Sahu, M. et al. (2022) Simulation Based Optimization of Geometrical Factors and Process Parameters for a Continuous Caster to Fabricate Aluminum Based MMC. Inter Metalcast 16, pp. 1758–1776.

https://doi.org/10.1007/s40962-021-00705-5

[10] Mishra, S. K., Chandra, H., & Arora, A. (2019). Effects on Heat Transfer and Radial Temperature Profile of Non-Isoviscous Vibrational Flow with Varying Reynolds Number. Journal of Applied Fluid Mechanics, 12(1), pp. 135-144.

https://doi.org/10.29252/jafm.75.253.28952

[11] Mishra, S. K., Choudhury, A., &Sahu, S. (2014). CFD Investigation of Influences of Reverse Textures on Bearing Surface of a Journal Bearing. Journal of Applied Fluid Mechanics, 7(3), pp. 395-399. https://doi.org/10.36884/jafm.7.03.19364

ESCI: 05

[12] Singh, P., Dewangan, N.K., Potdar, R.M., Singh, S., Mishra, A. &Mishra, S.K. An Optimal Framework for the Effective Delivery of the Radiation to the target by Considering the Case of Head and Neck Cancer. Polish Journal of Medical Physics and Engineering, 2024, Sciendo, vol. 30 no. 3, pp. 132-144. https://doi.org/10.2478/pjmpe-2024-0016

[13] Singh, P., Mishra, A. &Mishra, S. K. (2024). Acomprehensive analysis of the challenges and potential side effects of radiation therapy for palliative cancer treatment. Médecine Palliative 23(2), pp. 75-91. https://doi.org/10.1016/j.medpal.2023.12.002

[14] Mishra, A., Bhusnur, S., &Mishra, S. K. (2024). Advancing Health Sciences and Biomedical Technology: A Parametric Spline based ECG Modeling. Everyman’s Science, 57(2). https://doi.org/10.59094/emsj.v57i2.85

[15] Mishra, S. K., Arora, A., Kumar, Y., Sao, M. and Chandra, H. (2020) CFD study of heat transfer effect on nanofluid of Newtonian and non-Newtonian type under vibration. Chemical Product and Process Modeling, Vol. 16 (4), pp. 20200027.

https://doi.org/10.1515/cppm-2020-0027

[16] Mishra, S. K., Chandra, H. & Arora, A (2019). Effect of velocity and rheology of nanofluid on heat transfer of laminar vibrational flow through a pipe under constant heat flux. International Nano Letters 9, pp. 245–256. https://doi.org/10.1007/s40089-019-0276-4

Scopus: 01

[17] Singh, P., Singh, S., Mishra, A. &Mishra, S. K. (2024). Multimodality Treatment Planning Using the Markov Decision Process: A Comprehensive Study of Applications and Challenges. Research on Biomedical Engineering, 40(2), pp. 435-450.

https://doi.org/10.1007/s42600-024-00349-4

UGC Care/Peer Reviewed publications: 09

[18] Mishra, A., Bhusnur, S., Mishra, S. K.& Singh, P (2023).Innovative ECG Signal Modeling: Unleashing the Potential of the Parametric Spline Approach for Advancing Global Health Challenges. Indian Journal of Technical Education 46(4), pp. 160-165. (National Journal)

[19] Kumar, S. and Mishra, S. K. (2022). Optimization of Injection Molding Process by using different types of Conformal Cooling Channels. Research Journal of Engineering and Technology, 13(2) pp 47-50. https://doi.org/10.52711/2321-581X.2022.00006

[20] Deshmukh, Y. K., and Mishra, S. K. (2020). Wear Analysis of Single Step Nozzle in Abrasive Water Suspension Jet Machining through CFD. I-manager’s Journal on Mechanical Engineering, 10(4), 30-39. https://doi.org/10.26634/jme.10.4.17485

[21] Jain, A. K., and Mishra, S. K. (2020). Elastic Analysis of Functionally Graded Rotating Annular Disk with Varying Properties using ANSYS. I-manager’s Journal on Material Science, 8(3), 36-46. https://doi.org/10.26634/jms.8.3.17456

[22] Mishra, S. K., Chandra, H., & Arora, A. (2019). Application of Vibration on Heat Transfer - A Review. I-manager’s Journal on Future Engineering & Technology. 15 (1), 72-81. https://doi.org/10.26634/jfet.15.1.15877

[23] Mishra, S. K., Chandra, H., & Arora, A. (2019). Numerical Investigation of the Effects of Velocity and Particle Concentration on Heat Transfer of Vibrational Flow of Non-Newtonian Nanofluid. I-manager’s Journal on Mathematics, 8 (l), 34-46.

https://doi.org/10.26634/jmat.8.1.16239

[24] BikasChandrakar, ShatendraSahu&Mishra, S. K.(2015). “Potential of Teacher Learning Based Optimization: A Review”, Dr. B. C. Roy Engineering College Research Journal, The Bulletin of Engineering and Science, Vol. 06, No. 01, pp. 31-39, Jan-2015 (ISSN 0974-7176).Print only (National Journal)

[25] Mishra, S. K., Chandra, H., & Arora, A. (2012). Solid Liquid Non-Newtonian Fluid Flow in Pipe: A Review. ActaMechanicaSlovaca, 16(2), 62-73.

https://doi.org/10.21496/ams.2012.020

[1] Mishra, A., Bhusnur, S., Mishra, S. K.& Singh, P (2024). Parametric B-spline method for synthetic ECG signal generation: An alternative approach to addressing challenges in ECG analysis.AIP Conf. Proc. 3111, 050010(1-7). https://doi.org/10.1063/5.0221545

[2] Rakesh Kumar Sahu, Saurabh Verma &Mishra, S. K., “Optimization of parameters to Minimize the SFC of Abrasive Water Suspension jet machining through TLBO”, 7th Int. Conf. on production, mechanical and automobile engineering (ICPMAE-2015), Raipur, pp. 31-39, 28 Jun, 2015.ISBN: 978-93-85225-36-9

[3] P. Satyamurthy, P. Rai, V. Tiwari, Mishra S., S. K. Rai, M. Sonkar and A. V. Deshpande, “Thermal-hydraulic Studies of Heavy Liquid Metal Spallation Target for High Flux Research Reactor Operating under ADS Mode”, Proc. International conference on peaceful uses of atomic energy – 2009 V-2, New Delhi (India), 29 Sep - 1 Oct, 2009. Poster-Paper No.229. https://inis.iaea.org/search/search.aspx?orig_q=RN:41014800

[1] Mishra S.  “Effect of superimposed vibration on laminar forced convection heat transfer and radial temperature profile of non-Newtonian fluid”, BITCON-19 national conference on futuristic trends in mechanical engineering, Bhilai Institute of Technology, Durg, 01 March, 2019.

[2] Mishra S.  “An overview of thermal shape memory alloy”, BITCON-19 national conference on futuristic trends in mechanical engineering, Bhilai Institute of Technology, Durg, 01 March, 2019.

[3] Mishra S.  “Complex internal fluid flow behavior”, BITCON-18 national conference on frontiers in mechanical engineering, Bhilai Institute of Technology, Durg, 15 Feb 2018.

[4] Jain A. & Mishra S.  “A review on functionally graded annular disc”, BITCON-18 national conference on frontiers in mechanical engineering, Bhilai Institute of Technology, Durg, 15 Feb, 2018.

[5] Deshmukh Y. & Mishra S.  “A comprehensive review in the field of nozzle in AWSJ machining”, BITCON-18 national conference on frontiers in mechanical engineering, Bhilai Institute of Technology, Durg, 15 Feb, 2018.

[6] Tamrakar K. & Mishra S.  “Analysis of process parameters for wax injection process”, BITCON-17, Bhilai Institute of Technology, Durg, 28 March, 2017.

[7] Sahu P. & Mishra S.  “Surface alloying of aluminum alloy (LM4) with iron powder using TIG welding”, BITCON-17, Bhilai Institute of Technology, Durg, 28 March 2017.

[8] Sahu S., Gangber P., Sahu S., & Mishra S.  “Productivity enhancement through cost optimization of supply chain in steel industry”, BITCON-17, Bhilai Institute of Technology, Durg, 28 March, 2017.

[9] Mishra S., Arora A., & Chandra H.  “Continuous gas lift studies for circulation of heavy liquid metal using CFD”, BITCON-17, Bhilai Institute of Technology, Durg, 28 March, 2017.

[10] Gangber H., Ganguly S. K., &Mishra, S. K., “Optimization of process parameters for wax injection process in investment casting”, BITCON-16, Bhilai Institute of Technology, Durg, 29 Jan, 2016.

[11] Chandrahas, Mishra, S. K.& Deepak Mahapatra, “Application of MCDM approach to improve quality of manpower: A case study”, BITCON-16, Bhilai Institute of Technology, Durg, 29 Jan 2016.

[12] Manish Kumar & Mishra, S. K., “Study of CFD analysis of solar air heater energy and efficiency”, BITCON-16, Bhilai Institute of Technology, Durg, 30 Jan, 2016.

[13] Chandrahas, Mishra, S. K. & Deepak Mahapatra, “Maintenance strategy and decision making- AHP method”, BITCON National Conference on Innovations in Mechanical Engineering for sustainable development, BIT Durg, pp. 554-559, 20-21 Feb, 2015.

[14] Saurabh Verma, Mishra, S. K. & S. K. Moulick, “CFD Analysis of nozzle in Abrasive water Suspension Jet Machining”, BITCON National Conference on Innovations in Mechanical Engineering for sustainable development, BIT Durg, pp. 586-597, 20-21 Feb, 2015.

[15] Mishra, S. K., A.V. Deshpande and P. Satyamurthy, “Gas lift liquid metal target studies for experimental accelerator driven subcritical reactor”, Proc. 36th National Conference on FMFP, COEP Pune, Paper ID 10-MPF-1, 2009.

S.No

Title

Details of Books

Joint Author, if any

1

Approach to Minimize Shrinkage of Wax Pattern in Investment Casting: Optimizing parameters for Wax Injection Process in Investment Cast Product

LAP LAMBERT Academic Publishing.

ISBN: ‎ 978-620-0-47655-5

KshitijTamrakar, Mishra, S. K. &Yogesh Kumar

2

Efficient Heat Enhancement Technique: Vibration of Nano fluid. LAP LAMBERT Academic Publishing

LAP LAMBERT Academic Publishing.

ISBN: ‎978-620-0-31406-2

Mishra, S. K. and Arun Arora