Skip to main content
Announcement
apply for central counselling admission Filling Of Form documentation verification Pay Fees Confirm Admission
Notices
  1. Home
  2. Department
  3. Faculty Details

About Faculty

icon

Dr.Shubhrata Nagpal

Professor

godshubh@gmail.com

Dr.Shubhrata Nagpal

Employee ID 10034
Date of Joining 01-08-1997
Nature of Association Regular
Department Mechanical Engineering
Designation Professor
Educational Qualification 1. PhD , JANUARY 2015, NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR(C.G.) 2. Name of PG: MASTER OF ENGINEERING , MECHANICAL ENGINEERING (MACHINE DESIGN), 2000,RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA , BHOPAL,Gold Medalist 3. Name of UG: Bachelor of En
E-Mail godshubh@gmail.com
Contact Number 0788- 2321163
Areas of Interest

Research Areas: • Major:Machine Design. • Minor:Fluid Mechanics , Engineering Graphics , Mechanical Measurement and Metrology , Theory of Machines , Dynamics of Machines , Engineering Mechanics , Solid Mechanics, Stress Analysis, Finite Element Analysis , Theory of elasticity & plasticity

Publications

    (a). Research Papers Published (National/ International Journal)

     

    [1] S.Nagpal, S.Sanyal, N.K Jain, “Interaction effect of auxiliary holes for mitigation of stress  concentration in Isotropic  plate with central  circular  hole subjected to in plane loading” ,  International Journal of Mechanics and Solids, ISDN 0973-1881 Volume- 6 ,Number-2  (2011), pp 149-156.

    [2] S.Nagpal, S.Sanyal, N.K Jain, “Stress concentration and it’s mitigation techniques in flat plate  with  different  singularities-  A critical  review”.  Engineering  Journal , ISSN 0125-8281, Vol 16, No 1 (2012) PP 1-16 .Volume-16,  Number-1 (2012) pp 1-16,( 1Jan 2012), DOI:10.4186/ej.2012.16.1.1.

    [3] S.Nagpal, S.Sanyal, N.K Jain, “Design  optimization  of  rectangular  isotropic/orthotropic plate with opposite semicircular notches subjected to in-plane static loading for reduction of stress  concentration factor,” pp. 2239-2242, Volume-6, Number- 18(2011), International  Journal of Applied engineering Research-Print pp. 2239-2242, Volume 6, Number 18(2011),International Journal of Applied engineering Research Print ISSN 0973-4562 Online ISSN 1087—1090.

     [4] S.Nagpal, “Optimization  of  rectangular  plate  with  central  square  hole subjected to in-    plane static loading for mitigation of  SCF”,  Volume-1,  Issue-6 ,  August – 2012  International Journal   of Engineering Research and Technology. ISSN 2278-0181

     [5] S.Nagpal, S.Sanyal, N.K Jain, “ Mitigation  curves  for  determination  of  relief  holes  to  mitigate stress  concentration factor in thin plates loaded  axially for  different  discontinnuities”,  International   Journal  of  Engineering  and   Innovative   Technology  (IJEIT) ,Volume-2, Issue-3, September 2012, pp1-7,

    [6] S.Nagpal, S.Sanyal, N.K Jain, “Analysis and mitigation of stress concentration factor of a   rectangular isotropic and  orthotropic plate  with  central  circular    hole  subjected  to in-plane   static  loading   by  design  optimization”,   International   Journal   of  Innovative Research in Science, Engineering and Technology, Volume-2,Issue-7,July 2013, pp 2903- 2913,

    [7] S.Nagpal,  S.Sanyal,  N.K Jain, “Effect of elastic constants on Stress Concentration Factor and its  mitigation in  rectangular  plate with central circular hole under in plane loading”, International  Journal of Engineering Research & Technology (IJERT), Volume-3 Issue- 6,  June  2014, pp1413-1426.

    [8] Shubhrata Nagpal, Nitin Jain, Shubhashis Sanyal , “Analysis And Modification Of Isotropic/Orthotropic Plate With Central Elliptical Hole Subjected To In-Plane Static Loading For Reduction Of Stress Concentration Factor”, International Journal of Advanced Engineering Research and Studies E-ISSN2249–8974,IV/II/Jan.-March,2015/218-222.

    [9] Shubhrata Nagpal, Nitin Kumar Jain, Shubhashis Sanyal, “Three Dimensional Parametric Analyses of Stress Concentration Factor and Its Mitigation in Isotropic and Orthotropic Plate with Central Circular Hole Under Axial In-Plane Loading”, Received: 21 April 2013 / Accepted: 14 July 2015 / Published online: 6 August 2015, Journal of The Institute of Engineers (India) - Series C (January–March 2016) 97(1):pg.85–92,DOI 10.1007/s40032-015-0197-6 .

    [10]  Shubhrata Nagpal, “Analysis and Mitigation of Stress Concentration factor in  Rectangular plate with Central Circular hole under Transverse Loading”, Received 24th February 2016 revised 16th May 2016, accepted 10th July 2016, Research Journal of Engineering Sciences, Vol. 5(7), pg 33-45, July (2016), E - ISSN 2278 – 9472.

    [11] Sanjay G. Sakharwade , Shubhrata Nagpal , “Motion Resistance of Belt Conveyor”, Rungta International Journal of Mechanical and Automobile Engineering, Vol 1, No 2-4 (2016) Pages: 11-14,ISSN(O), 2456-0286.

    [12] Y.K. Sahu and S. Nagpal, “Design and optimization of a low pressure vessel”, Received 8th April 2017, revised 11th July 2017, accepted 10th August 2017, Vol. 6(7), pg.1-6, August (2017), Research Journal of Engineering, International Science Community Association, ISSN 2278 – 9472.

    [13]A Study on the Effect of Slicing Procedures in Layered Manufacturing Pratik Damle, Dr.(Mrs.) Shubhrata Nagpal,* - Bhilai Institute of Technology, Durg 491001, India. Page No: 1403 -1409 DOI:16.10089.IJAMTES.2018.V8I03.15.43757

    [14]Nonlinear Stress-strain Curve for Viscoelastic Model Sanjay G Sakharwade, Shubhrata Nagpal - Bhilai Institute of Technology, Durg (CG). Page No: 1457 – 1460,DOI:16.10089.IJAMTES.2018.V8I03.15.43765

    [15]Strutural Analysis Of Wind Turbine Blade: Reviews Santosh Rao ,Dr. Shubhrata Nagpal - Bhilai Institute of Technology, Durg (CG).Page No: 1468 - 1472 DOI:16.10089.IJAMTES.2018.V8I03.15.43767

    [16]Study of Various Methods used for Disposal and Utilization of Fly Ash Chandrashekhar Bhardwaj , Tekchand Dewangan , Akshay Agney , Dr. Shubhrata Nagpal  - BIT Durg.Page No: 1516 – 1524 DOI:16.10089.IJAMTES.2018.V8I03.15.43774

    [17]Analysis of Flow through an Inlet Duct in an Electrostatic Precipitator with and without guide vanes Y.K.Sahu, S. Nagpal, Kinshuk Maitra - RCET Bhilai (C.G), BIT Durg (C.G.).Page No: 1548 – 1555 DOI:16.10089.IJAMTES.2018.V8I03.15.43778

    [18] YUGAL KISHOR SAHU, SHUBHRATA NAGPAL, “Response Surface Methodology Based Determination of Stress Intensity Factor of Dissimilar Cracks On Composite Surfaces”  May-July 2018 issue, i-manager’s Journal on Future Engineering and Technology, Vol. 13 , No. 4,page 28-33,ISSN:Print: 0973-2632,ISSN Online: 2230-7184,UGC UNPAID JOURNAL

    [19]Chugh Ramit , Nagpal Shubhrata, “Applications of Photoelasticity – A review”, Volume-03 ISSN: 2455-3085 (Online) Issue-08 RESEARCH REVIEW International Journal of Multidisciplinary August-2018 www.rrjournals.com [UGC Listed Journal]

    [20] Ankit Kumar Jain, Dr. (Mrs.) Shubhrata Nagpal,”Optimization of EDM Process Parameter for MRR and SR of 17- 4PH Steel Using Response Surface Methodology”, Transportation Management (2018) Volume 1,doi:10.24294/tm.v1i2.633.

    [21] Pratik Damle , Dr.(Mrs.) Shubhrata Nagpal, “Experimental analysis and comparison of mechanical properties of different materials used in Rapid prototyping”, INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING WWW.IJRAME.COM ISSN (ONLINE): 2321-3051, Vol.7 Issue 6, June 2019 Pg: -01-10.

    [22] Sakharwade, S. G., Nagpal S,,”Analysis of Dynamic Tension in Belt During Transient Condition of Belt Conveyor System by Lagrange’s Approach, International Journal of Computer Sciences and Engineering,Vol.-7, Issue-1,pp306-310,JAN 2019.

    [23] Sanjay G. Sakharwade1, Shubharata Nagpal,” Simulation of Belt Conveyor System in Simulink”, International Journal of Management, Technology And Engineering, ISSN NO: 2249-7455, Volume IX, Issue III, MARCH/2019, Page No: 56-62.

    [24] Ankit Kumar Jain, Dr. (Mrs.) Shubhrata Nagpal,” Optimization of Electric Discharge Machining Process Parameters: A Review” © 2019 IJRAR June 2019, Volume 6, Issue 2 www.ijrar.org (E-ISSN 2348-1269, P- ISSN 2349-5138),pg337-339.

    [25] Sharda Pratap Shrivas, Dr. G K Agrawal, Dr. S Nagpal,” Strength Analysis Of Friction Stir Welding (Fsw) Joint Under Minimize Fsw Tool Rotation Speed”, International Journal of Management, Technology And Engineering Volume IX, Issue III, MARCH/2019,ISSN NO : 2249-7455, pg 9-19.

    [26] Ramit Chugh & Dr. Shubhrata Nagpal,”,” Photoelastic Analysis Of Stress Concentration Factor In Rectangular Plate With Notches & Holes And Its Validation Through Ansys”, Global Journal Of Engineering Science And Researches, [Chugh, 6(4): April 2019] ISSN 2348 – 8034 DOI- 10.5281/zenodo.2630903 Impact Factor- 5.070,pg 8-13.

    [27]Sakharwade, S. G., & Nagpal, S. (June,2019). Analysis of transient belt stretch for horizontal and inclined belt conveyor system. International Journal of Mathematical, Engineering and Management Sciences, 4(5), 1169–1179

    [28]Sakharwade, S. G., and Nagpal, S. (June, 2019). Study of transient characteristics of belt conveyor by lumped mass method. i-manager’s Journal on Future Engineering and Technology, 14(4), 33-38.

    [29] Sakharwade, S. G., & Nagpal, S. (July,2019). Analysis of dynamic belt stretch during full load starting condition of  belt conveyor system . i-manager's Journal on Instrumentation & Control Engineering, 7(1), 19-25.

    [30] Topendra Kumar Saruva , Shubhrata Nagpal,” Optimization of a Pressure Vessel Using Design of Experiments”, International Journal of Research in Engineering, Science and Management Volume-2, Issue-9, September-2019 www.ijresm.com | ISSN (Online): 2581-5792.

    [31] Yugal  Kishor Sahu, Dr.Shubhrata Nagpal, “Analysis of Interacting Semi-elliptical Cracks in Plate and Thick Walled Cylinders for Linear Elastic and Elastic Plastic Regime Using FEM”, Journal  of Advance Research in Dynamical & Control Systems, Vol. 11, Special Issue-05, 2019 Article History: Received: 15-01-2019, Revised: 23-04-2019, Accepted: 27-05-2019. Scopus Index And Ugc Approved

     

    (b). Full length paper in proc. of International / National Conferences

    International Conferences

    [1] S.Nagpal, S.Sanyal, N.K Jain “Design  optimisation  of rectangular  isotropic  /orthotropic plate with opposite circular  notches   subjected  to  in-plate  static loading for reduction of SCF”, 20-22nd Oct 2011,IETET-2011, GIMT, Kurushetra (Haryana).

    [2] S. Nagpal,  S. Sanyal,  N.K Jain , “Analysis   of  stress   concentration   factor  in   a  rectangular Plate   with   multiple  discontinuities   subjected  to  in plane   loading”, 29- 31st   Jan  2014 ,.ICMEETS-2014 ,MANIT, Bhopal (M.P.).

    [3] Sharda Pratap Shrivas, Dr. G K Agrawal, Dr. S Nagpal , A Review Paper On Thermal Properties Of Welding Parameter affecting Welding Strength”, Third International Conference On Advances In Steel , Power And Construction Technology , March 22-23, 2017, OP Jindal University , Raigarh.

    [4]Ashish Kumar Khandelwal, Dr. G K Agrawal, Dr. S Nagpal , “A Review Paper On Variation In Heat Transfer Due To Change In Water Wall Tube In Supercritical Boiler”, Third International Conference On Advances In Steel , Power And Construction Technology , March 22-23, 2017, OP Jindal University , Raigarh.

    [5] Dr. Shubhrata Nagpal, , “Mitigation Polynomials for Stress Concentration Factor around Circular Hole in Rectangular Plate under In-Plane Loading”, 2nd International Conference on Research Advancements in Applied Engineering Sciences, Computer and Communication Technologies (ICRAAESCCT-19) 22nd-23rd March 2019, ORGANIZED BY IFERP, PUNE

    National Conferences

    [1] S.Nagpal, Manisha Sharma, “Role  of  Technical  Institutes   to  Promote  innovation & Entrepreneurship ”, National conference, NSTMIE,RCET, Bhilai.,13-14MARCH2005.

    [2] S.Nagpal, “Achieving concentric profit circle in the audit by EQM & TQM for the benefit of society”, National Conference On Recent Trends And Breakthrough Development In Mechanical Engineering ,Bit Con,2007,16-17march2007.

    [3] S.Nagpal, “Isomorphism in planar mechanism- A Survey of existing methods BITCON-2008.

    [4] S.Nagpal, S.Sanyal, N.K Jain,esign optimization of thin rectangular Isotropic plate with central circular hole subjected to in-plane loading and study of interaction effect on stress concentration factor in presence of auxiliary holes in the same plate”, All Indiaseminar on , October 2011.

     [5] Dr. Shubhrata Nagpal, Dr. Nitin Jain and Dr. Shubhashis Sanyal , “Analysis and       modification of Isotropic/Orthotropic Plate with central elliptical hole subjected to In-Plane Static Loading for reduction of Stress Concentration Factor” , National Conference On Innovations For National Development ,Bit-Con 2015, Bhilai Institute of Technology , Durg (C.G.),February 2015.

    [6]  Dr. Nagpal Shubhrata , Nagpure Homeshwar G., Dr. Nath S.K.,” Transient thermal analysis of steam turbine rotor of 210 mw power plant using finite element method”, BIT-CON 2016.

    [7] Dr. ShubhrataNagpal , “Analysis and mitigation of stress concentration factor in rectangular plate with elliptical hole under inplane loading”, BIT-CON 2016.

    [8] P N Umang, Dr. Shubhrata  Nagpal,” Increasing Machinibility Of Planomiller Machines”, BIT-CON2016,29th-30th Jan 2016,B.I.T.,Durg

    .[9] ShubhrataNagpal , “Analysis and mitigation of stress concentration factor in rectangular plate with central circular hole under transverse loading”, Emerging Trends In Science, Technology & Management For National Development,BIT-CON 2016,29th-30thjan 2016,B.I.T.,Durg.

    [10] Sumit Kumar Agrawal, Dr. Shubhrata Nagpal, “Evaluation of Stress concentration reduction in a plate with a hole through photo elasticity”, BIT CON 2017, National Conference On Research Challenges in Science , Technology and Management for National Development, 28TH March 2017.

    [11] Ashish Kumar Khandelwal, Dr. G K Agrawal, Dr. S Nagpal ,“Literature Review On Heat Transfer In Supercritical Boiler”, BIT CON 2017, National Conference On Research Challenges in Science , Technology and Management for National Development, 28TH March 2017.

    [12] Sharda Pratap Shrivas, Dr. G K Agrawal, Dr. S Nagpal, “Review On Welding Parameter Affecting Thermal Properties Of Welding Strength” , BIT CON 2017, National Conference On Research Challenges in Science , Technology and Management for National Development, 28TH March 2017.

    [13] Santosh Rao, Dr. (Mrs.) S.Nagpal, “Fluid Structure Interface Analysis And Design Optimization Of A Small Scale Wind Turbine Blade: Review”, National Conference On Research Challenges in Science , Technology and Management for National Development, 28TH March 2017.

    [14] Y.K.Sahu, Dr. (Mrs.) S. Nagpal , “ Design And Optimization Of A Low Pressure Vessel”, National Conference On Research Challenges in Science , Technology and Management for National Development, 28TH March 2017.

    [15] Sanjay G Sakharwade, Shubhrata Nagpal,”Nonlinear Stress-strain Curve for Viscoelastic Model”, National Conference On Frontiers in Science Technology AND Management for National Developement, 15TH February, 2018

    [16]Santosh Rao ,Dr. Shubhrata Nagpal,”Strutural Analysis Of Wind Turbine Blade: Reviews”, National Conference On Frontiers in Science Technology AND Management for National Developement, 15TH FEBRUARY, 2018.                          

    [17] Dr. Shubhrata Nagpal,Chandrashekhar Bhardwaj,Tekchand Dewangan,Akshay Agney,“Study of Various Methods used for Disposal and Utilization of Fly Ash”, National Conference On Frontiers in Science Technology AND Management for National Developement, 15TH February, 2018

    [18] Pratik Damle, Dr.(Mrs.) Shubhrata Nagpal,,“A study on the effect of slicing procedures in layered manufacturing”, National Conference On Frontiers in Science Technology AND Management for National Developement, 15TH February, 2018

    [19] Y.K.Sahu, S. Nagpal, Kinshuk Maitra ,Analysis of Flow through an Inlet Duct in an Electrostatic Precipitator with and without guide vanes “,National Conference On Frontiers in Science Technology AND Management for National Developement, 15TH February, 2018.

    [20] Harshit Nema ,Pratinav Mishra ,Kartikey Misra ,Ajeet Tiwari     ,Utkarsh Trivedi ,Dr (Mrs) Shubhrata Nagpal, “Six Stroke Engine”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [21] Ramit Chugh ,Dr. Shubhrata Nagpal, “Renewable Energy: “Current Scenario And Way Forward”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [22] Ashutosh Sahu, Syed Saqlain Ali, Ankit Soni, Dr.. Shubhrata Nagpal,“Biodiesel: An alternative fuel for Diesel Engine”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [23] 1Santosh Rao , 2 Dr. Shubhrata Nagpal,” Fluid Struture Interaction Analysis Of Wind Turbine Blade: Reviews”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [24]shiva Kashyap, Dr. Shubhrata Nagpal “A Review On Designing of Jigs And Fixtures”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [25]sanjay G. Sakherwade, Dr. Shubhrata Nagpal, “Simulation  of Belt Conveyor System in Simulink”, National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [26]Sharda Pratap Shrivas, Dr. G.K.Agrawal, “Strength Analysis Of Friction Stir Welding (FSW) Joint Under Minimize FWS Tool Rotating Speed” , National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

    [27] Yugal Kishor Sahu, Dr. S. Nagpal, “ Comparision Of Stress Intensity Factor Of A Semi – Elliptical Crack In A Thick Walled Cylinder Of An Isotropic  Material And Composite Material”,National Conference on Futuristic Trends in Science, Technology and Management for National Development, 01 March 2019,BITCON-19.

Other Info.

Other Responsibilities:

    From

    To

    Administrative Position

    Major responsibility

    2007

    2009

    Editor of news letter of Mechanical Engineering Department

    Monthly publication of Mech BIT times

    2008

    -

    Editorial Board member, BIT PANORAMA

    Editing and publishing of magazine

    2009

    -

    Editorial Board member, BIT PANORAMA

    Editing and publishing of magazine

    2010

    2013

    NSS

    VARIOUS PROGRAMMES IN COLLEGE, CSVTU, CAMPS

    July 2011

    July 2012

    Assistant  examination control superintendent

    Conduction of home exams and university exams in institute

    21.10.2011

    Till Date

    Member of committee for Dalit Students

    To keep vigil on caste discrimination against Dalit students

    10.03.2014

    Till Date

    Member of Internal complaints Committee

    To examine any complaint/ suggestion received from women employees and girl students

    2014

    2015

    Training and placement cell

    Coordination of programmes  and campus drives

    APRIL2014

    TILL DATE

    Flying squad team member of CSVTU

    Visit examination centers of CSVTU in colleges all around Chhattisgarh for smooth conduction of  different exams

    2015

    Till Date

    Institutes Inspection Committee, CSVTU

    Inspection of institutes for affiliation to CSVTU

    JULY 2015

    JUNE 2017

    Material Testing Coordinator, Mechanical Engineering Dept

    To coordinate material testing in the dept.

    JUNE 2015

    JUNE 2016

    SPIC MACAY/Extra-curricular activities

    To conduct SPIC MACAY activities and conduct quiz, debate etc.

    JULY 2016

    JUNE 2017

    PROFFESSIONAL ACTIVITIES COMMITTEE MEMBER

    Conduction of different programmes

    JULY 2017

    TILL DATE

    CULTURAL COMMEETTE MEMBER

    CONDUCTION OF VARIOUS ACTIVITIES IN COLLEGE AND ON UNIVERSITY LEVEL



Felowship/Awards/Other recognitions:

    Membership:            

    • Corporate Member of The Institute of Engineers (India) AM/086309/5 Charted Engineer (India)
    • Life Member of Indian Society for Technical Education LM41390
    • Life Member of Quality Circle Forum of India , ID:039999109823
    • PhD supervisor of Government Chhattisgarh Swami Vivekanand Technical University, Bhilai, Chhattisgarh, INDIA.
    • JACEES FOUNDATION MEMBER of Junior Chamber International India , 09-01059
    • Zone Trainer of JCI (INDIA)