Menu

  1. home
  2. Department
  3. Faculty Details
image description

Department of Civil Engineering

Dr. M.K. GUPTA

Professor & Head

Dr. M.K. GUPTA

Department Civil Engineering
Designation Professor & Head
Educational Qualification B.E. (Civil) ,Pt. RSU Raipur , M.E. (Structures) , DAVV Indore , Ph.D. ,VNIT Nagpur
E-Mail info@mohangupta.com
Contact Number 9826446405
Areas of Interest

Structural engineering design

Publications

    Publications in International Journals

    1. GargiD. D. and Gupta, M. K., “A Brief Review on Different Steel Members under Combined Axial Load and Moments as per IS 800:2007,” International Journal of Research in Engineering and Technology (IJRET), Vol. 5, Issue 8, 2016, pp. 64 - 67.
    2. SonalB. and Gupta, M. K., “Experimental Investigation of Bolted Cold Formed Steel Angle under Tension,” International Journal of Engineering Sciences &Research Technology (IJESRT), Vol. 5, Issue 7, 2016, pp. 210 - 220.
    3. GargiD.D. and Gupta, M. K., “Comparative Studies of OHE Mast Used in Indian Railways,”International Journal of Innovations in Engineering and Technology (IJIET), Vol. 5, Issue 2, 2014, pp. 149 – 153.
    4. Supe J. D. and Gupta, M. K., “Flexural Strength – A Measure to Control Quality of Rigid Concrete Pavements,”International Journal of Scientific & Engineering Research (JCSER), Vol. 5, No. 11, 2014, pp. 46 – 57.
    5. Supe J. D. and Gupta, M. K., “Role of Heat of Hydration in Attaining Early Strength Gain of Cement in Concrete”, International Journal of Pure and Applied Research in Engineering and Technology (IJPRET), Vol. 3, No. 2, 2014, pp. 94 – 106.
    6. Supe J. D. and Gupta, M. K., “Suitability of Demolished Concrete Waste in Modern Construction and its 28th day Strength Prediction”, International Journal of Civil, Structural, Environmental, and Infrastructure Engineering Research and Development (IJCSEIERD), Vol. 4, No. 4, 2014, pp. 75 – 86.
    7. Supe J. D. and Gupta, M. K., “Predictive model of compressive strength for concrete in-situ” International Journal of Structural and Civil Engineering Research (IJSCER), Vol. 3, No. 1, 2014, pp. 90 – 102.
    8. Supe J. D. and Gupta, M. K., “A Comprehensive Review of Early Strength Gain of Concrete” International Journal of Engineering Research and Industrial Applications (IJERIA), Vol. 6, No. 4, 2013, pp. 1 – 14.
    9. Jaiswal S. K., Verma M. K., Gupta Mohan, “Development of Rule Curve for RavishankarSagar Reservoir by Simulation”, International Journal Of Engineering Research & Industrial Applications (IJERIA), Volume 5, 2012, pp. 88 – 98.
    10. Gupta M. K. and G. I. S. Reddy, “Railway UnderBridge ConstructionMethodology, Design and Analysis”, International Journal of Multidisciplinary Research &Advancesin Engineering (IJMRAE),ISSN 0975-7074, Vol. 3, No. I, 2011, pp. 293-308.
    11. Gupta M. K. and Gupta Shekhar, “Analysis and Design Of Foot Over Bridge Using HSS”, International Journal of Multidisciplinary Research &Advancesin Engineering (IJMRAE),ISSN 0975-7074, Vol. 3, No. I, 2011, pp. 323-330.
    12. Jaiswal S. K., Verma M. K., Gupta Mohan, “Rainfall-Inflow Simulation using ANN”, International Journal of Engineering and Technology, International Research Publication House, Volume 3, No. 3, 2010, pp. 291 – 298.
    13. Jaiswal S. K., Verma M. K., Gupta Mohan, “Application of Soft Computing Techniques in Water Resources Engineering”, International Journal Of Engineering Research And Industrial Applications (IJERIA), Volume 3, No. II, 2010, pp. 211 – 224.
    14. Gupta Mohan and Gupta L.M., “Evaluation of Stress Distribution in Bolted Steel Angles under Tension", Electronic Journal of Structural Engineering, Vol. 4, 2004, pp. 17 – 27.
    15. Gupta Mohan and Gupta L.M., "Discussion: AISC LRFD Rules for Block Shear in Bolted Connections - A Review", Engineering Journal, American Institute of Steel Construction (AISC), Vol. 39, No. 4, 2002, Chicago, Illinois, USA, pp. 240

     

    Publications in National Journals

    1. Viz G. S., Agrawal M. L.,and GuptaM. K., “Assessment of Traffic Noise and analysis of its Parameters on NH-06 Passing through Chhattisgarhpp. 15 – 21.
    2. GargiD. D. and Gupta M. K., “Design Aids of Parallel Flange Section Subjected to Axial Compression, As per IS 800:2007pp. 1 – 5.
    3. Jaiswal S. K., Verma M. K. and Gupta M. K., “Planning for Optimum Use of Water Resources of MRP Complex using Mike BasinVolume. 33, No. 1,2013, pp. 15 – 22.
    4. Jaiswal S. K., Verma M. K. and Gupta M. K., “Application of ANN for Rainfall-Inflow modeling for Dudhawa ReservoirVolume. 5, 2012, pp. 41 – 45.
    5. Gupta M. K. and Gupta, L. M., “Welded Steel Angle Tension Members – A Review of Indian Design Practicepp. S-II-71 – S-II-80.
    6. Jaiswal S. K., Verma M. K. and Gupta M. K., “Volume. 4, No. I, 2011, pp. 44 – 49.
    7. Bajpai R. K., Sharma S. and Gupta M. K., “Dynamic Analysis on Multistory R.C.C. Framed Structures with the Help of Different SoftwareVolume. 2, No. I, 2011, pp. 1 – 4.
    8. Gupta M. K. and Singh AJ, “
    9. Sarkar Kaustav and Gupta M. K., ”Comparative study of optimum design approaches and artificial neural network based optimum design of a singly reinforce concrete beam”, Journal of Structural Engineering, Structural Engineering Research Centre (SERC) Chennai, Vol. 36, No. 5, December 2009 – January 2010, pp-311-318.
    10. Gupta Mohan and Gupta L.M., “Design Charts for Compression Members as per IS 800 - 2007”, Steel in Construction, Technical Journal of Institute for Steel Development and Growth (INSDAG), Vol. 10, No. 2, 2009, pp. 43 - 51.
    11. Gupta M K and SarkarKaustav, “Modelling of section forces in a continuous beam using artificial neural network”, Journal of Structural Engineering, Structural Engineering Research Centre (SERC) Chennai, Vol. 35, No. 6, February-March 2009, pp-416-422
    12. Gupta Mohan, “Additional Sectional properties of Indian Standard Tapered Flange Sections”, Steel in Construction, Technical Journal of Institute for Steel Development and Growth (INSDAG), Vol. 7, No. 1, 2006, pp. 71 - 78.
    13. Gupta Mohan, “Additional Sectional properties of Indian Standard Parallel Flange Sections”, Steel in Construction, Technical Journal of Institute for Steel Development and Growth (INSDAG), Vol. 6, No. 2, 2005, pp. 61 – 74.
    14. Gupta Mohan and Gupta L.M., “Limit State Design of Bolted Steel Angles Under Tension”, Journal of Structural Engineering, Structural Engineering Research Centre (SERC), Vol. 31, No. 4, 2005, Chennai, India, pp. 265 - 274.
    15. Gupta Mohan and Gupta L.M., "Net Section Efficiency of Bolted Steel Angles under Tension", Steel in Construction, Technical Journal of Institute for Steel Development and Growth (INSDAG), Vol. 3, No. 2, 2002, pp. 71 – 77.

     

    (b). Full length paper in proc. of International / National Conferences

     

    Publications in International Conferences

    1.      Gupta Mohan and Gupta L.M., "Load Capacity of Welded Steel Angles in Tension", Proceedings of the Structural Engineering Convention (SEC 2008), December 18 - 20, 2008, Structural Engineering Research Centre, Madras, India.

    2.      Gupta Mohan and Gupta L.M., "An Improved Approach to Compute Block Shear Capacity of Steel Angles”, Proceedings of the AISC – ECCS Workshop on Connections in Steel Structures V, June 03 – 04, 2004, Amsterdam, Netherlands.

    3.      Gupta Mohan and Gupta L.M., "Finite Element Techniques for Modelling of Steel Angles under Tension: Problems and Prospects", Proceedings of the “Structural Engineering Convention - An International meet (SEC)", December 12 - 14, 2003, Indian Institute of Technology, Kharagpur, India.

    4.      Gupta Mohan and Gupta L.M., "Block Shear Failure of Bolted Steel Single Angles in Tension", Proceedings of the International Conference on "Advances in Structures - Steel, Concrete, Composite and Aluminum (ASSCCA'03)", June 23 - 25, 2003, Sydney, Australia, pp. 89 - 93.

    1. Gupta Mohan and Gupta L.M., "Effective Net Areas of Bolted Steel Angles in Tension", Proceedings of the 7th International Conference on "Steel and Space Structures", October 02 - 03, 2002, Singapore, pp. 91 – 96.

    Publications in National Conferences

    1. Gouraha, P. K. and Gupta M. K., “Selection of a Curve for High Strength Steel Columns from the Multiple Column Curves of IS 800:2007”,National Conference on Emerging Trends in Civil Engineering, January 29 - 30, 2016,Bhilai Institute of Technology, Durg (C.G.), pp.79 – 89.
    2. Nandy L. and Gupta M.K., “Comparison of Static and Dynamic Analysis”, National Conference on Emerging Trends in Civil Engineering, January 29 - 30, 2016,Bhilai Institute of Technology, Durg (C.G.), pp.38 – 44.
    3. Qureshi A. A. and Gupta,Mohan, “Study Of Bending Moment Coefficients For Continuous Beam”, National Conference on Emerging Trends in Civil Engineering, January 29 - 30, 2016, Bhilai Institute of Technology, Durg (C.G.), pp.5 – 17.
    4. Gupta M. K., “Structural Steel Design using Efficient Parallel Flange Sections”, National Conference on Innovations in Civil Engineering,20-21 February 2015,Bhilai Institute of Technology, Durg (C.G.), pp.771 – 775.
    5. Supe J. and Gupta, M. K., “Review on use of Demolition Waste in Highway Construction “A State of Art”, National Conference on Innovations in Civil Engineering,20-21 February 2015,Bhilai Institute of Technology, Durg (C.G.), pp.733 – 740.
    6. Vij, G. S,Agrawal M. L., and Gupta, M. K. “Assessment and Analysis of Traffic Noise and it’s Related Parameters on NH-06”, National Conference on Innovations in Civil Engineering,20-21 February 2015,Bhilai Institute of Technology, Durg (C.G.), pp.711 – 722.
    7. Kambde, S., Ghosh, P. K. and Gupta, M. K., “Socioeconomic Study on Households Solid Waste Management of Different Categories and Classes:A Case Study: Durg City”, National Conference on Innovations in Civil Engineering,20-21 February 2015,Bhilai Institute of Technology, Durg (C.G.),pp.669 – 680.
    8. Jaiswal S. K., Gupta Mohan, Verma M. K., Verma S. K., “”, National Conference on Hydraulics and Water Resources, SVNIT, Surat, 29 - 30 December 2011.
    9. Jaiswal S. K., Gupta Mohan, Verma M. K., Verma S. K., “Estimation of Hydropower Potential by Optimum Reservoir Operation”, 38th National Conference on Fluid Mechanics and Fluid Power, MANIT, Bhopal, 15 - 17 December 2011.
    10. Gupta, Mohan, “Parallel Flange Sections For Elegant And Efficient Structural Steel Design”, Proceedings of 27th National Convention of Civil Engineers & National Seminar on Integrated Development of Towns as Growth Centres, 15 – 16 October, 2011, Organised by The Institution of Engineers’ (India), Chhattisgarh State Centre, Raipur (C.G.) in association with National Institute of Technology, Raipur (C.G.), pp. 13 - 17.
    11. Jaiswal, S. K., Verma, M. K., &Gupta, Mohan, “Optimum Use of Water Resources for Development of Towns”, Proceedings of 27th National Convention of Civil Engineers & National Seminar on Integrated Development of Towns as Growth Centres, 15 – 16 October, 2011, Organised by The Institution of Engineers’ (India), Chhattisgarh State Centre, Raipur (C.G.) in association with National Institute of Technology, Raipur (C.G.), pp. 74 - 78.
    12. Bajpai, Rahul Kumar, Gupta, Mohan& Sharma, Shraddha, “Sustainable Construction of A Multistoried Residential Apartment”, Proceedings of 27th National Convention of Civil Engineers & National Seminar on Integrated Development of Towns as Growth Centres, 15 – 16 October, 2011, Organised by The Institution of Engineers’ (India), Chhattisgarh State Centre, Raipur (C.G.) in association with National Institute of Technology, Raipur (C.G.), pp. 10 - 12.
    13. Bajpai, Rahul Kumar, Gupta, Mohan& Sharma, Shraddha, “Dynamic Response Comparison of Multi Storied Building”, Proceedings of 27th National Convention of Civil Engineers & National Seminar on Integrated Development of Towns as Growth Centres, 15 – 16 October, 2011,Organised by The Institution of Engineers’ (India), Chhattisgarh State Centre, Raipur (C.G.) in association with National Institute of Technology, Raipur (C.G.), pp. 7 - 9.
    14. Gupta, Mohan, “Green Building Practices”, AICTE sponsored National Seminar on “Advances in Environmental Science and Engineering”, Department of Engineering Chemistry, BIT Durg, 8-9 January 2009.
    15. Gupta, Mohan and Sarkar K., “Artificial Neural Network Model for Preliminary Design of a Doubly Reinforced Concrete Beam”, Proceedings of the National Conference on Technological Advances in Civil Engineering, November 07 - 08, 2008, Bhilai Institute of Technology, Durg (C.G.), pp.183 – 189.
    16. Singh, A. J. and Gupta, Mohan, “Development of Virtual Structural Dynamics Lab (VSDL) : Modal Analysis Tool”, Proceedings of the National Conference on Technological Advances in Civil Engineering, November 07 - 08, 2008, Bhilai Institute of Technology, Durg (C.G.), pp.179 – 182.
    17. Sisodiya, D. S. and Gupta, Mohan, “An Analytical Study of a New Steel Column-Beam Connection using ANSYS”, Proceedings of the National Conference on Technological Advances in Civil Engineering, November 07 - 08, 2008, Bhilai Institute of Technology, Durg (C.G.), pp.

     

    1. Gupta Mohan and Gupta L.M.,” Design Aids For Steel Compression Members As Per New IS800”, Proceedings of the National Conference on Technological Advances in Civil Engineering, November 07 - 08, 2008, Bhilai Institute of Technology, Durg (C.G.), pp. 135 – 140.
    2. Hardaha R. P., Gupta, Mohan andRamtekkar, G. D., “A Review on Stone Dust as a Substitute of Sand in Cement Concrete Mix”, Proceedings of the National Conference on Technological Advances in Civil Engineering, November 07 - 08, 2008, Bhilai Institute of Technology, Durg (C.G.), pp. 111 – 114.
    3. Gupta Mohan and Sarkar K.,“Neural Network Model for the cost optimum design of a singly reinforced RCC Beam”, National Conference on Recent Advances in Structural Engineering, April 04, 2008, organized by JNTU College of Engineering, Anantpur (A.P.), pp. 139 – 147.
    4. Gupta Mohan and Sarkar K.,“Neural Network Model for the cost optimum design of a short axially loaded RCC Column”, National Conference on Emerging Trends in Civil Engineering, February 15 – 16, 2008, National Institute of Technology, Raipur.
    5. Kowar, M.K., Arora, A., Gupta Mohan and Shekhar, S.,“Opportunities of Broadband Technology in enhancing Quality of Education”, Proceedings of the All India Seminar on Advanced Communication Techniques and Networking: Exploring Challenges, January 06 – 07, 2007, Shri Shankaracharya College of Engineering and Technology, Durg.
    6. Gupta Mohan and Gupta L.M.,”An Alternate Logarithmic Model for Wind Speed Variation”, Proceedings of the Third National Conference on Wind Engineering (NCWE’06), January 05 - 07, 2006, Jadavpur University, Kolkata, pp. 96 – 103.
    7. Gupta Mohan,"Economics of Steel Structures", Proceedings of All India Seminar on Issues, opportunities & Challenges in Indian Steel Industries, The Institution of Engineers (India), Raipur State Centre, January 22 - 23, 2005, Raipur, India, pp. 162 - 167.
    8. Gupta L.M., Gupta Mohan and Tiwari Preeti,"Development of Equation for Background Factor", Proceedings of the Second National Conference on Wind Engineering (NCWE'04), February 12 - 14, 2004, Visvesvaraya National Institute of Technology, Nagpur.
    9. Gupta Mohan and Gupta L.M.,"Partial Safety Factor for Yield Stress - with special reference to Net Section Design of Steel Angles with Bolted Connections", Proceedings of the All India Seminar on "Structural Steel for Construction Industry (SSCI)", January 24 - 25, 2004, Rourkela, India.
    10. Gupta Mohan and Tiwari Preeti,"IT Applications in Civil Engineering", Proceedings of All India Seminar on Role of Information and Communication Technology for Overall Development, Organized by The Institution of Engineers (India), Raipur State Centre, January 24 - 25, 2004, Raipur, India, pp. 9 - 11.
    11. Gupta Mohan and Gupta L.M.,“Load Capacity of Bolted Steel Single Angles in Tension", Proceedings of the All India Seminar on "Modern Trends in Steel Structures", February 08 - 09, 2002, Nagpur, India, pp. 30 – 34.

     

Other Info.

Other Responsibilities:

    Experience of Administrative Responsibilities in Academic Institutions:

    From

    To

    Administrative Position

    Major responsibility

    May 2017

    Present

    Dean (Infrastructure)

    Infrastructure Development

    June 2014

    Present

    Remote Centre Coordinator, NMEICT

    Coordinate the activities of Remote Centre

    June 2008

    Present

    HOD (Civil)

    Departmental Development

     

     

     

     

     

     

     

    Membership:

    • Indian Society of Technical Education (ISTE), New Delhi, India.
    • Computer Society of India (CSI), New Delhi, India.
    • PhD supervisor of Government Chhattisgarh Swami Vivekanand Technical University, Bhilai, Chhattisgarh, INDIA.
    • Member board of studies, Chhattisgarh Swami Vivekanand Technical University, Bhilai, C.G. India.

    S. No.

    Name of Faculty

    Name of Professional Body

    Membership Type

    Membership Number

    1

    Dr. M. K. Gupta

    Institute for Steel Development and Growth

    Life member

    IINDVML 001

    2

    Dr. M. K. Gupta

    Indian Society for Technical Education

    Life member

    LM 25545

    3

    Dr. M. K. Gupta

    Institution of Engineers (India)

    Life member

    F–116633-2

    4

    Dr. M. K. Gupta

    Indian Society for Wind Engineering

    Life member

    LM 307

    5

    Dr. M. K. Gupta

    Indian Association for Structural Engineering

    Life member

    LM 46

     



Felowship/Awards/Other recognitions: